Category Archives: Transmitter Site log

Silence Alarm. With station automation so prevalent a good silence alarm is about mandatory. Broadcast tools VAD-2 fits the bill and its cheap. It is rather a pain to program but beyond that it dials a call list when silence … Continue reading →

Pending Project 04/21/09 JAW parts-hp-fence tower-fence-drawing I found a company for Ice Bridge parts here. http://www.bettermetal.com/l/index.html  One question to answer, Is the bridge allowed to attach to the tower? 19′ from building to tower. 10′ to outside building 9′ to … Continue reading →

Harris uni-coder- Lucent wavestar model ws2-ac With EVA-162 and NIM100a cards smpte 310 output with Logic innovations tsm-2800 mux only one smpte 310 input others sdi. smpte 310 output to exciter. Contact: 222-8200 or 217-221-7529 harris- mark schlinkmen Closed captions … Continue reading →

Hello,Suspecting the arc detector to be bad on the primary cavity I replaced it with a new one from Harris broadcasting. part#378-0180-000 $485. When I tested it the arc detector fault did not come on so I tested in a … Continue reading →

Hello, Wednesday night around 2030 pm the WTJR analog Transmitter shut off with a secondary cavity ARC fault. It returned it to air during Richard Roberts Program. This is the 4th time recently I have seen this fault. It is … Continue reading →

The Harris analog has a Glitch in the video. It appears like light specks moving from left to right. It is?intermittent. The suspect is the video module in Exciter at this time. The other possibility is the flywheel sync circuit … Continue reading →